SWORL ACCESSORIES

PORTS

SWORL reusable ports are 100% silicone which will not degrade under normal or autoclave use. The ports are designed to resist sticking and are well suited for infusing a variety of reactive resins. SWORL ports may be used as vacuum or resin ports.

SWORL ports may be bonded in place with a small amount of PRSI during bag fabrication or after the bag is completely cured using AC Polymer. Ports may be easily relocated or reused. NOTE: The resin feed line should be secured to the ID of the SWORL port to create a leak-proof seal.

SWORL Ports Technical Description
COLOR: Transparent tube with mounting hub
HEIGHT: 2" (total port height including mounting hub)
DIAMETER SIZE: 5/8" ID x 3/4 inch OD (additional sizes available as special orders)
TEMPERATURE RESISTANCE: 400°F continuously / 455°F intermittent

 

REINFORCING FABRIC

Reinforcement fabric is required when using the PRSI 108 one part formulas.

SWORL Reinforcing Fabric Technical Description
COLOR: White or light gray
WIDTH:width varies
LENGTH: length varies
MELTING POINT 480°F
ELONGATION: 6 - 9%

 

AC POLYMER

For repair, AC Polymer is only required for autoclave applications when the cured bag exceeds its bonding window.

 

RESIN RACEWAY WAX

Resin raceway wax may be used to create resin flow channels directly into the bag during fabrication.

 

IRVBS EXTRUDED WAX

The IRVBS extruded wax is used during the bag fabrication to create a resin stop seal on the under side of the bag. See our Process page on the benefits of this product and how to implement IRVBS.

 

    
     SWORL © 2009-2011